Placing The Original On The Original Glass; Precautions For Placing The Original On The Original Glass - Konica Minolta Di1610f Advanced Information

3

Placing the Original on the Original Glass

The method for positioning the original differs depending on the type of
original being used.

Precautions for Placing the Original on the Original Glass

Care should be taken when positioning the following types of originals.
An original of a non-standard size:
G The document size cannot be detected automatically. Press the
[Paper] key or the [Zoom] key, and then select the desired paper size
(p. 4-3) or zoom ratio (p. 4-9).
A highly transparent original (OHP transparencies, translucent paper,
etc.):
G Place a blank sheet of paper of the same size over the original
(p. 3-32).
A book or other three-dimensional object:
G Let the machine scan the contents of the original with the Auto
Document Feeder raised. Do not attempt to push the Original Glass
with excessive force, as a malfunction could result. (The maximum
load resistance of the Original Glass is 3 kg.)
Note
While scanning with the Auto Document Feeder open, do not look
directly at the bright light that may shine through the Original Glass.
Although the light that shines through the Original Glass is bright, it is
not a laser beam and, therefore, is not as dangerous.
3-30
Before Making Copies or Faxing
Di1610f