Operation
You can search video from the first to last recorded images, or you can set the start and
stop times and dates.
2.
Option
From
To
Check Time Overlap
Alarm-In
Motion
Document 800-00918 Rev F
02/08
Figure 4-15
Event Log Search Option Screen
Select your search options.
Table 4-9
Event Log Search Options
Action
Highlight the box beside From and then press
and Off. When set to Off, you can enter a specific Date and Time. When set
to On, the DVR finds the first recorded image.
Highlight the box beside To and then press
Off. When set to Off, you can enter a specific Date and Time. When set to
On, the DVR finds the last recorded image.
Highlight the box beside Check Time Overlap and then press
toggles between On and Off. You can only turn the Check Time Overlap on
or off if a user-defined date and time is set in the From and To fields.
If the DVR date and time have been reset, it is possible for the DVR to have
more than one overlapping start and stop times. When set to On, you are
asked to select one of the overlapping start and stop time. When set to Off,
the DVR displays search results from all start times to all stop times.
Highlight the field beside Alarm-In and then press
alarm inputs that you want to include in your search.
Highlight the field beside Motion and press
cameras for which you want any reports of motion detection.
to toggle between On
to toggle between On and
to
. You can select the
. You can select the
123