Camera Status; Camera Toolbar - Honeywell HRHT4041 User Manual

Performance Series HQA Digital Video Recorder Local User Guide
Figure 3-2 Live View Window (Single Channel)

Camera Status

Camera status icons appear at the bottom of the channel window.
Video is being recorded
Motion detected in scene

Camera Toolbar

A camera toolbar is located at the top of each channel window. To display the toolbar, move the
mouse pointer to the top of the channel window.
Figure 3-3
Table 3-1
INSTANT PLAY
26
No video signal
Camera locked
Play back the previous 5 to 60 minutes of recorded
video.
Note: The playback time is set to 5 minutes by default.
You can change this setting in Main Menu > Setting >
System > General > General > Instant Play.