Camshaft Disassembly; Camshaft Inspection - Chery Tiggo 2009 Service Manual

Disassembly
1. Remove the camshaft bearing cap bolts.
NOTE: Equally loosen camshaft bearing cap bolts
in several steps.
2. Remove the camshaft bearing caps and place them in proper order.
NOTE: The camshaft bearing caps are marked for identification.
3. Remove the camshafts and then remove the camshaft seals.
Inspection
• Measure the camshaft cam lobe height.
• If wear is beyond the limit, replace the camshaft.
Intake Cam Lobe Height
Exhaust Cam Lobe Height
Chery Automobile Co., Ltd.
CYLINDER HEAD UNIT REPAIR
CAMSHAFT CAM LOBE HEIGHT
BESM020035
BESM020037
37.15 mm
37.05 mm
02–
02
67