• Check the inner diameter of each cylinder bore (See Cylinder Bore Inspection in Section 02 Engine).
All Cylinders
• Check piston ring to groove side clearance.
− Clean the ring slot using a suitable tool.
− Measure piston ring to groove side clearance.
First Ring
Second Ring
• Wipe the cylinder bore clean. Insert ring and push down with piston to ensure it is square in the bore. The ring
gap measurement must be made with the ring posi-
tioned at least 13 mm from bottom of cylinder bore
and below the bottom of the oil ring travel where
the cylinder bore has minimal wear. Check gap with
feeler gauge.
129
02–
ENGINE UNIT REPAIR
CYLINDER BORE
RING GROOVE CLEARANCE
83.500 - 83.510 mm
0.04 - 0.08 mm
0.01 - 0.0251 mm
Chery Automobile Co., Ltd.
BESM020063
BESM020051
BESM020052