Check Cmp Sensor Resistance - Chery Tiggo 2009 Service Manual

9.

CHECK CMP SENSOR RESISTANCE

• Check resistance between the following CMP sensor terminals, component side:
TERMINAL NO.
1 & 2
1 & 3
2 & 3
Is the check result normal?
Yes >>
Replace the CMP sensor with a known good CMP sensor.
Monitor the CMP sensor signal on the KES-200 screen.
− If the CMP sensor signals were normal, the system is OK.
− If the CMP sensor signals were still irregular or missing, go to step 13.
No >>
Replace CMP sensor.
Chery Automobile Co., Ltd.
DIAGNOSIS & TESTING
RESISTANCE
(25°C)
Except 0 or
03
41
03–