Camshaft Specifications (2.0L) - Chery Tiggo 2009 Service Manual

7. Using a valve spring compressor CH-20018 (1),
compress the valve springs.
8. Install the valve keepers.
9. Strike the valve stem lightly with a plastic hammer after installation to verify proper assembly.
10. Install valve tappets in the head.
11. Install the camshafts.
Installation Notes:
• Coat the valve oil seal with engine oil.
Camshaft
Specifications
Camshaft Specifications
DESCRIPTION
Intake Cam Lobe Height
Exhaust Cam Lobe Height
Journal #1 Outer Diameter
Journal #2, #3, #4, #5, Outer Diameter
Cam Bearing #1 Inner Diameter
Cam Bearing #2, #3, #4, #5, Inner Diameter
Journal #1 Clearance
Journal #2, #3, #4, #5 Clearance
Intake Camshaft Axial Clearance
Exhaust Camshaft Axial Clearance
139
02–
CYLINDER HEAD UNIT REPAIR
SPECIFICATION (mm)
37.15
37.05
31.934 - 31.95
23.947 - 23.96
32 - 32.025
24 - 24.021
0.05 - 0.091
0.04 - 0.074
0.15 - 0.20
0.15 - 0.20
Chery Automobile Co., Ltd.
BESM020067