3. Remove the connecting rod cap nuts.
4. Remove the connecting rod bearing cap.
5. Using a hammer handle or similar tool, push the
piston and connecting rod assembly (1) out
through the cylinder head side of the engine block.
NOTE: Before removing the piston and connecting
rod assembly, check the connecting rod side
clearance.
6. Remove the connecting rod bearings.
CAUTION: When removing the connecting rod
side bearings, note the installation position.
Keep them in the correct order.
Chery Automobile Co., Ltd.
ENGINE UNIT REPAIR
02
BESM020042
BESM020043
BESM020044
BESM020045
235
02–