Check Manifold Absolute Pressure (Map) Sensor Electrical Connector; Check Manifold Absolute Pressure (Map) Sensor Power Supply - Chery Tiggo 2009 Service Manual

2.

CHECK MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR ELECTRICAL CONNECTOR

• Disconnect the MAP sensor (1) electrical connector.
• Inspect the electrical connector for damage.
Is the electrical connector OK?
Yes >>
Go to the next step.
No >>
Repair or replace the electrical connector
as necessary.
3.

CHECK MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR POWER SUPPLY

• Turn ignition switch on.
• Check MAP sensor supply between MAP sensor
connector terminal 1 and 3.
• 5 V should exists.
Is the check result normal?
Yes >>
Go to step 5.
No >>
Go to the next step.
70
03–
DIAGNOSIS & TESTING
Chery Automobile Co., Ltd.
VISMD030201
VISMD030010