Chery Tiggo 2009 Service Manual page 215

21. Disconnect the following automatic transaxle elec-
trical connectors:
• Output shaft sensor (1)
• Input shaft sensor (2)
• Electromagnetic valve switch connector (3)
• Gear switch connector (5)
22. Disconnect the transaxle fluid lines (6) using a suit-
able tool.
23. Remove the shift cable (4) from the transaxle
assembly.
24. Remove the catalytic converter to exhaust manifold
bolts (1).
(Tighten: Exhaust manifold bolt to 49 ± 5 N·m)
25. Remove the front axle shaft (See Front Axle Shaft Removal & Installation in Section 09 Driveline & Axle).
26. Raise and support the vehicle.
27. Drain the engine oil.
28. Remove the power steering pump fluid line and set aside (See Power steering pump Removal & Installation in
Section 11 Steering).
29. Lower the vehicle and install engine lift chain hangers.
186
02–
ON-VEHICLE SERVICE
Chery Automobile Co., Ltd.
LTSM080153
LTSM020189