Chery Tiggo 2009 Service Manual page 153

4. Remove the connecting rod retaining bolts.
5. Remove the connecting rod bearing cap.
6. Using a hammer handle or similar tool, push the
connecting rod/piston assembly (1) out through the
top of the cylinder block.
7. Remove the connecting rod bearings (See Con-
necting Rod Removal & Installation in Section 02
Engine).
CAUTION: When removing the connecting rod
side bearings, note the installation position.
Keep them in the correct order.
8. Installation is in the reverse order of removal.
Chery Automobile Co., Ltd.
ENGINE UNIT REPAIR
02
BESM020042
BESM020043
BESM020044
BESM020045
124
02–