Connecting Rods Specifications; Connecting Rod Disassembly - Chery Tiggo 2009 Service Manual

Connecting Rods
Specifications
Torque Specifications
DESCRIPTION
Connecting Rod Bolts
Clearance Specifications
DESCRIPTION
Connecting Rod Radial Clearance
Connecting Rod Axial Clearance
Disassembly
1. Remove the connecting rod cap bolts.
2. Remove the connecting rod bearing cap.
3. Using a hammer handle or similar tool, push the
piston and connecting rod assembly (1) out
through the cylinder head side of the engine block.
NOTE: Before removing the piston and connecting
rod assembly, check the connecting rod side
clearance.
58
02–
ENGINE UNIT REPAIR
2nd Step: Tighten the connecting rod bolts an additional
TORQUE (N·m)
1st Step: Tighten bolts to 25 N·m
90°
SPECIFICATION (mm)
0.016 - 0.051
0.002 - 0.013
Chery Automobile Co., Ltd.
BESM020043
BESM020044