Cylinder Head Inspection; Cylinder Head Assembly - Chery Tiggo 2009 Service Manual

Inspection
• Cylinder head must be flat within 0.04 mm.
• Inspect camshaft bearing journals for scoring.
• Remove carbon and varnish deposits from inside of
valve guides with a valve guide cleaner.
• Verify the valve tappets move freely in their bores,
and that they have been rotating.
• Check the valve guide height.
Assembly
1. Install new valve guide if necessary.
2. Install new valve seat if necessary.
3. Using special tool CH-20011 (1) and CH-20012 (2),
install the new valve oil seal.
4. Install the valves into the cylinder head (larger diameter on intake side).
5. Install the valve springs.
6. Install the valve spring retainers.
Chery Automobile Co., Ltd.
CYLINDER HEAD UNIT REPAIR
02
BESM020068
LTSM020224
65
02–