Valve Spring Specifications; Valve Springs Disassembly - Chery Tiggo 2009 Service Manual

4. Using valve spring compressor CH-20018 (1), com-
press the valve springs.
5. Install the valve keepers.
6. Strike the valve stem lightly with a plastic hammer after installation to verify proper assembly.
Valve Springs
Specifications

Valve Spring Specifications

DESCRIPTION
Spring Free Length
Spring Height At 620 Newtons Of Pressure
Disassembly
NOTE :
The following special tools are required to perform the repair procedure:
• CH-20011 - Valve Seal Installer
• CH-20012 - Valve Stem Seal Installer Guide
• CH-20013 - Valve Seal Remover
• CH-20017 - Valve Keeper Installer
• CH-20018 - Valve Spring Compressor
1. Using the special tool CH-20018 (1), compress the
valve springs.
Chery Automobile Co., Ltd.
CYLINDER HEAD UNIT REPAIR
SPECIFICATION (mm)
47.7
32.0
02
BESM020067
BESM020067
73
02–