Table of Contents
Advertisement
80
Receiving MIDI Data
1
Press the SETUP button found below the LCD display.
This will enter the SETUP mode
2
Use the PARAMETER encoder to scroll through the menu pages to locate the MIDI
Backup menu page.
The SETUP button will flash upon selection.
3
Press the SETUP button to enter the MIDI Backup set-up mode.
The LCD display will show the current selection:
4
Use the PARAMETER encoder to select the RECEIVE DATA command, press DOWN
arrow so that Execute? is flashing then press the SETUP button.
The LCD display will show the following message:
5
Now start playback of the MIDI device where the data is stored.
When the Data transfer is complete the LCD display will show the following message:
6
Press the SETUP button to exit the Menu.
RM1d/RM1ds User Guide
Advertisement
Table of Contents
