Headphone Out & Monitoring - SoundCraft Si Performer User Manual

HEADPHONE OUT & MONITORING
The Si PERFORMER features a comprehensive monitoring system. The active monitor signal is
always available on the headphone output (located below the armrest near fader 1) with level
controlled by the MON LEVEL encoder however the monitor signal may also be patched in parallel
to other outputs on the console, see PATCHING.
The monitor output nominally follows the main L&R mix but will interact with the SOLO systems
and is affected by the options available from the MONITOR page on the main menu.
The stereo MONITOR meters provide a visual indication of the overall level in the monitor system. .
NOTE: The selected monitor source is always over-ridden by any active AFL or PFL signal, the
presence of such is indicated by illumination of the PFL or AFL lights and the illumination
of the SOLO CLEAR key.
61
Soundcraft Si Performer User Guide V1.1 1112