Messages And Signals - Sharp UX-51 Operation Manual

Messages and Signals

Display messages
A.M. TRANSFER
ORIGINALSTAU
FUNKTIONEN
E
LEITUNG BELEGT
KEINE DATEN
KEINE NR. GESP.
KEIN PAPIER
AUFGEL. WÄHLEN
ÜBERHITZUNG
The answering machine's transfer function has been
turned on as described in "Other Functions" in
Chapter 2.
The original document is jammed. See the following
section, Clearing Paper Jams .
The FUNKTION key has been pressed.
Transmission or reception was not successful. Press
STOP to clear the message, and then try again. If the
error persists, see "Line Error" in "Problems and
Solutions" in this chapter.
An extension phone connected to the fax is being
used. Do not lift the fax's handset or attempt
transmission at this time, as this will interrupt the
conversation on the extension phone.
This appears if you attempt to search for an
automatic dialling number when none have been
stored.
You have tried to dial or clear a Rapid Key or Speed
Dial number that hasn't been programmed (a full
number hasn't been assigned to it).
You have run out of fax paper. Load a new roll of fax
paper as described in "Loading the Fax Paper" in
Chapter 1.
The SPEAKER key has been pressed and the fax is
waiting for you to dial. (To return to the date and time
display, press the SPEAKER key again.)
The print head has overheated. Operation may be
continued once it cools.
Display Messages
98