Sharp UX-51 Operation Manual page 71

Making Telephone Calls
PBX operations
If your fax is connected to a PBX, you can use it to perform the following
operations:
Making enquiry calls: During a call, you can put the other party on
hold, make a further call to a third party, and then go back to your
original caller.
Transferring calls: You can transfer a call to another number on the
same PBX without operator assistance.
Note: Make sure that the correct setting is selected for Option Setting 10-4
(see Chapter 8, Option Settings).
Making enquiry calls
1
During the telephone conversation, press
the SEARCH/R key. This puts the other
party on hold.
2
When you hear the dial tone, dial the
number of the third party for the enquiry
call.
3
When you have finished the enquiry call,
you will be automatically returned to the
original caller as soon as the third party
hangs up.
Transferring calls
1
During the telephone conversation, press
the SEARCH/R key. This puts the other
party on hold.
2
When you hear the dial tone, dial the
number to which you want to transfer the
call. When the other party answers, hang
up, and the call will be transferred.
70
SEARCH
R
SEARCH
R