Sharp UX-51 Operation Manual page 35

Transfer Function
3
Press the START/MEMORY key.
4
Enter a transfer number (max. of 32 digits
including pauses) by pressing the number
keys.
5
Press the START/MEMORY key and
then the STOP key.
Recording the transfer message
The transfer message plays when you answer the telephone, and informs you
that the call is a transfer call. It can be up to 15 seconds long. To record a
transfer message, follow the steps described in Recording an Outgoing
Message in this chapter. The following is an example:
"Hello. This is a transfer call for (YOUR NAME). Enter your remote code
number now."
34
START/MEMORY
5 5 5 1 2 3
(Example)
START/MEMORY
STOP
4