Sharp UX-51 Operation Manual page 38

Overriding the answering machine
Your callers should follow the steps below to override the answering
machine.
1
Your caller calls the UX-238/51 from a
tone dial telephone. When the outgoing
message begins, they should press the "#"
key on their telephone.
The caller will hear a short beep, and
the outgoing message will stop.
2
The caller should enter the override code
and "#" by pressing the appropriate keys
on their telephone.
If an incorrect code is entered, the
caller will hear four beeps. He or she
must re-enter the correct code within
60 seconds or the line will be
disconnected.
3
The UX-238/51 will make a special
ringing sound. Pick up the handset to
answer the call. (Note that an extension
telephone connected to the same line will
not ring.)
If you do not answer within 30 seconds,
the outgoing message will play again
and the caller can then leave a message.
Override Ringing
5 5 4
(Example)
37