Sharp UX-51 Operation Manual page 62

Using the SEARCH/R key
If you don't remember the Rapid Key or Speed Dial number in which you
have stored a particular fax number, you can search for the number by
following the steps below. Once you have found the number, you can dial it
and transmit the loaded document by simply pressing the
START/MEMORY key.
1
Load the document(s).
The display will show:
SENDEBEREIT
Set the resolution and/or contrast if
desired.
2
Press the SEARCH/R key.
3
Enter the first letter of the stored name by
pressing the appropriate number key (the
key which corresponds to the required
letter) one or more times until the letter
appears in the display. If the name begins
with a special character or number, press 1.
If you don't remember the first letter, go
to Step 4 (you will scroll through the list
from the beginning).
If a name wasn't stored for the number,
press 0. This will cause numbers, not
names, to appear when you scroll.
Sending a Fax by Automatic Dialing
RESOLUTION
SEARCH
R
ABC DEF
2 3
1
JKL MNO
GHI
6
4 5
PQRS TUV WXYZ
7 9
8
61