Sharp UX-51 Operation Manual page 20

3
Press the START/MEMORY key.
The display will show:
4
Enter your fax number by pressing the number keys. Up to 20 digits can be
entered.
To insert a space between digits, press the # key. To insert a "+", press
the * key.
If you make a mistake, press the SEARCH/R key to move the cursor
back to the mistake and then enter the correct number. The new number
will replace the old number.
5
5
5
Example:
Press START/MEMORY to enter the fax number in memory.
The display will show:
Cursor: A dark square mark in the display that indicates where a number or
letter will be entered.
6
Enter your name by pressing the number keys as shown in the chart below.
Up to 24 characters can be entered.
To enter two letters in succession that require the same key, press the
SPEAKER key after entering the first letter to advance the cursor.
Example: SHARP = 7 7 7 7 7 4 4 4 2 2 7 7 7 7
Entering Your Name and Number
START/MEMORY
ENTER FAX #
1 2 3
5
START/MEMORY
ENTER YOUR NAME
SPEAKER
4
7 7
15