Sharp UX-51 Operation Manual page 104

Applicable telephone line
Compatibility
Configuration
Compression scheme
Scanning method
Effective printing width
Input document size
Effective scanning width
Contrast control
Copy function
Telephone function
Power requirements
Operating temperature
Humidity
Power consumption
Dimensions
Weight
As a part of our policy of continuous improvement, SHARP reserves the right to
make design and specification changes for product improvement without prior
notice. The performance specification figures indicated are nominal values of
production units. There may be some deviations from these values in individual
units.
Public switched telephone network / PBX
ITU-T (CCITT) G3 mode
Half-duplex, desktop transceiver
Modified Huffman and Sharp special mode
Sheet-feeder CIS (Contact Image Sensor)
210 mm max.
Automatic feeding:
Width: 148 to 216 mm
Length: 140 to 297 mm
Manual feeding:
Width: 148 to 216 mm
Length: 140 to 600 mm
210 mm max.
Automatic/Dark selectable
Standard
Standard (Cannot be used for incoming/outgoing if
power fails)
220-230 V AC, 50 Hz
5 to 35 C
Maximum: 85 %
Stand-by: 5.0 W
Maximum: 100 W
Width: 308 mm
Depth: 256 mm
Height: 138 mm
UX-51/238: Approx. 2.5 kg
UX-258: Approx. 2.6 kg
Spezifikationen
103