Using TEL Mode
Press the
EMPFANGSART
RECEPTION
MODE
When the reception mode is set to TEL, you must answer all calls using the
fax machine's handset or an extension phone connected to the same line.
Answering with the fax's handset
1
Pick up the handset when the machine rings.
2
If you hear a fax tone, wait until the display shows EMPFANGEN and then
replace the handset.
Beep
3
If the other party first talks and then wants to send a fax, press the
START/MEMORY key after speaking (press your START/MEMORY
key before the sender presses their Start key).
Make sure that the display shows EMPFANGEN , then replace the
handset.
START/MEMORY
key until the arrow in the display points to TEL.
TEL
TEL/FAX
EMPFANGEN
Note:
If you have set Option Setting 11 (Fax
signal receive) to NEIN, press the
START/MEMORY
key to begin reception.
EMPFANGEN
Receiving Documents
FAX
A.M.
65