Transaction Report - Sharp UX-51 Operation Manual

Printing Reports and Lists

Transaction Report

This report is printed out automatically after an operation is performed to
allow you to check the result. Your fax is set at the factory to print out the
report after a timer operation or when an error occurs. If desired, you can
change the setting to have it printed out under a variety of other conditions.
This is done by changing Option Setting 6 as described in Chapter 8.
The Transaction report cannot be printed out manually.
Explanation of headings
SENDER/
The fax number of the other machine involved in the transaction. In the case
EMPFÄNGER
of a transmission, the number dialled appears. In the case of a reception, the
programmed ID of the sending machine appears. If this machine does not
have an ID function, the communication mode will appear (for example,
"G3").
SEITEN Number of pages transmitted or received.
ANM. OK
- Transmission/reception was normal.
AUSFALL
persists, try a different outlet. If necessary, have an electrician check your
power lines.
PAP. STAU
Make sure the paper or document is loaded properly. Make sure the operation
panel is shut securely.
KEIN PAP.
COM.E-0 to
Line Error
See
ABBRUCH
pressed, no document was in the feeder, or the other machine requested
transmission using a function which your fax does not have. If you were
attempting to fax, make sure a document is in the feeder. If you were
receiving, contact the faxing party to see how they are trying to send to you.
90
- A power failure occurred. If you have power and the problem
- A problem with the paper or original document occurred.
- You ran out of paper during reception.
COM.E-7 - A telephone line error prevented the transaction.
Problems and Solutions
in in Chapter 12.
- Transmission was cancelled because the STOP key was