Sharp UX-51 Operation Manual page 75

Memory
3
Enter the number of the receiving
machine using one of the following
methods:
Press a Rapid Key.
Press the SPEED DIAL key and enter
a Speed Dial number.
Enter a full telephone number by
pressing the number keys.
4
Press the START/MEMORY key if you
entered a Speed Dial number or a full
number.
The document is first scanned and
stored in memory. The other machine is
then dialled (redialling will be
performed automatically if necessary).
When the connection is made,
transmission begins. Afterwards, the
document is cleared from memory and
your fax returns to standby mode.
If the memory becomes full...
If the memory becomes full while the document is being scanned, MEMORY
IS FULL will appear in the display.
Press the START/MEMORY key if you want to transmit the pages
which have been stored up to that point in memory. The remaining pages
will be ejected from the feeder. After transmission, the memory will be
cleared and you can transmit the remaining pages. You will also need to
transmit the page which was being scanned when the memory filled up.
Press the STOP key if you want to cancel the entire transmission.
74
01 02
03 04
06
(Example)
START/MEMORY