Loading The Document - Sharp UX-51 Operation Manual

Loading the Document

Loading the Document
Up to 10 pages (UX-51: 5 pages) can be placed in the feeder at one time. The
pages will be automatically fed into the machine starting from the page on
the bottom.
If you need to send or copy more than 10 pages (UX-51: 5 pages), place
the additional pages gently and carefully in the feeder just before the last
page is scanned. Do not try to force them in, as this may cause
double-feeding or jamming.
If your document consists of several large or thick pages which must be
loaded one at a time, insert each page into the feeder as the previous
page is being scanned. Insert gently to prevent double-feeding.
1
Adjust the document guides to the width
of your document.
2
Place the document face down and push it
gently into the document feeder. The top
edge of the document should enter the
machine first.
The feeder will draw the leading edge
of the document into the machine. The
display will show:
SEND READY
3
Adjust the resolution and/or contrast
setting (if desired) as described in the
section "Resolution and Contrast", then
dial the receiving machine as described in
"Sending a Fax by Normal Dialing".
48
RESOLUTION