Sharp UX-51 Operation Manual page 13

Loading the Fax Paper
2
Remove the packing paper from the paper compartment.
3
Make sure the ends of the guide wire are inserted in the holes. (If the guide
wire is not inseted correctly, out-of-paper detection will not be possible.)
4
Unwrap the roll of fax paper and place it in the compartment.
Important: The roll must be placed so that the leading edge of the paper
unrolls as shown. (The paper is only coated on one side for printing. If
the roll is placed backwards, the paper will come out blank after
printing.)
8
Schutzpapier und
Klebestreifen
entfernen
NEIN!
JA
Nur UX-51/UX-238:
Klebestreifen
entfernen