Sharp UX-51 Operation Manual page 56

Storing fax and telephone numbers for Automatic Dialling
1
Press these keys:
The display will show:
2
Press 1 to select EING..
The display will show:
3
Enter a two-digit Speed Dial number by pressing the number keys (01 to
10 for Rapid Key Dialling, 11 to 30 for Speed Dialling).
4
Enter the fax or voice number by pressing the number keys (max. of 32
digits including pauses). (Note: A space cannot be entered.)
Press the SPEED DIAL key to clear a mistake.
If a pause is required between any of the digits to access a special service
or an outside line, press the REDIAL key. The pause will appear as a
hyphen. Several pauses can be entered in a row.
If you are on a PBX, do not enter the access code for the public line. If
the number is within your PBX, enter an R before the number.
5 5
5
Press the START/MEMORY key.
Sending a Fax by Automatic Dialing
FUNCTION
3
FAX/TEL. NUMMERN
1
FAX/TEL. NR. EING.
KURZW. NR. EING.
0 1
(Example)
5 5 1 2 3
(Example)
START/MEMORY
4
55