Sharp UX-51 Operation Manual page 45

Remote Operations
Turning the Transfer function on or off
To turn Transfer on: Press "9", "1", and
"#", followed by the number of the box
("0" for the General Box) and "#".
To turn Transfer off: Press "9", "2", and
"#" on the telephone.
Changing the transfer telephone number
1
Press "9", "0", and "#" on the telephone.
2
After you hear a short beep, enter the new
telephone number. When finished, press
"#".
To insert a pause between any two
digits of the number, press "*".
Recording a new transfer message
1
Press "9", "3", and "#" on the telephone.
2
When you hear a short beep, speak into
the telephone to record the new message.
The time for the transfer message is
fixed at 15 seconds. After 15 seconds
(or earlier if the machine detects
silence after you finish speaking), you
will hear a beep, and the new message
will be played back automatically.
44
9
1
1
(Example)
0
9
5 4 6 1 1 3 4
(Example)
3
9