Sharp UX-51 Operation Manual page 84

Setting 3: NUMBER OF RINGS TO ANSWER
This sets the number of rings the fax machine waits before answering an
incoming call in FAX and TEL/FAX reception modes. Enter any number from
1 to 5.
Initial setting: 1
Note: In some countries, the lowest possible setting is 2.
FUNCTION
Press
4
Enter a number from 1
5
to
Setting 4: TEL/FAX REMOTE NUMBER (TRANSFER CODE)
If you hear a fax tone when you answer a call on a tone dial extension phone
connected to the same line as the fax, you can make the fax begin reception by
pressing 5, *, and * on the phone. Use this setting if you want to use a
number other than 5 to begin fax reception. You can enter any number from 0
to 9.
Initial setting: 5
FUNCTION
Press
4
Enter a number from 1 to
9
Optionale Einstellungen
until display
shows: ANZAHL DER RUFE
TEL/FAX FERNNR.
until
TEL/FAX FERNNR.
display
shows:
FERNNUMMER
STOP
STOP
83