Sharp UX-51 Operation Manual page 85

Optionale Einstellungen
Setting 5: REMOTE RECEPTION SELECT
If you don't intend to use the above TEL/FAX REMOTE NUMBER, you can
turn detection of the number off. This will ensure that the fax never mistakenly
attempts to begin reception if it detects a signal similar to the TEL/FAX
REMOTE NUMBER while you are talking on an extension phone. Press 1 to
turn detection on, or 2 to turn detection off.
Initial setting: 1
Press
FUNCTION
4
JA
NEIN
or
1
Setting 6: TRANSACTION REPORT PRINT SELECT
This sets the condition for printing out a Transaction Report. Enter a number
from 1 to 4 as follows:
1 (EINZELBERICHT):
2 (FEHL./TMR./SP.):
3 (SENDEBERICHT):
4 (FEHLERAUSDRUCK):A report will never be printed.
Initial setting: 2
FUNCTION
Press
4
1
Enter a number from to
4
84
until
display
FERNNUMMER
shows:
ÜBERTR. BERICHT
2
A report will be printed after each transmission,
reception, or error.
A report will be printed after an error or a timer
operation.
A report will be printed only after a transmission.
until
display
ÜBERTR. BERICHT
shows:
WÄHLMODUS
STOP
STOP