Sharp UX-51 Operation Manual page 102

2
Remove the paper roll.
UX-238: If any pieces of paper are
stuck in the cutter, remove them with
caution.
UX-238: Press the START/MEMORY
key to reset the cutter.
3
Cut off the wrinkled part of the paper.
4
Reload the paper.
Jammed fax paper is often caused by
improper loading. Be sure to carefully
follow the instructions for paper
loading given in "Loading the Fax
Paper" in Chapter 1.
If the display still shows PAPIERSTAU (UX-238 only)
If the display still shows PAPIERSTAU after you press the
START/MEMORY key in Step 2 above, the cutter is still engaged in the
cutting position. To open the cutter, turn the fax up on its rear end and insert
any long, rod-like object with a flat or blunt end into the hole marked
CUTTER RESET. Continue to push the rod in until you feel it move a lever
inside the machine.
Clearing Paper Jams
101