Messages And Signals - Sharp FO-2950M Operation Manual

Messages and Signals

Messages and Signals
Display messages
CAN'T PRINT DATA
CHECK PAPER SIZE
CHECK PC
COVER OPEN
DOCUMENT JAMMED
FUNCTION MODE
GRP . SPACE FULL
HOLD
LINE ERROR
LINE IS IN USE
130
A fax has been received to memory because printing
is not possible. This message will alternate with a
message that indicates the problem. The fax will print
out automatically when the problem is resolved.
The paper size setting is incorrect. Change the paper
size setting as described in Loading Printing Paper in
Chapter 1.
This appears if you press the E-MAIL key and your
computer is not turned on or is not correctly
connected to the fax machine.
The print compartment cover is open. Press down
firmly on both sides of the print compartment cover to
close it.
The original document is jammed. See the following
section, Clearing Paper Jams.
The FUNCTION key has been pressed.
This appears if you attempt to program a Group Key
when all Group Keys have already been
programmed.
The HOLD/SEARCH key has been pressed to put the
other party on hold during a phone conversation.
Press the HOLD/SEARCH again to take the other
party off hold.
Transmission or reception was not successful. Press
the STOP key to clear the message and then try
again. If the error persists, see Line Error in Problems
and Solutions in this chapter.
An extension phone connected to the fax is being
used. Do not lift the fax's handset or attempt
transmission at this time, as this will interrupt the
conversation on the extension phone.