Sharp UX-51 Operation Manual page 61

Sending a Fax by Automatic Dialing
Direct Keypad Dialling
You can also enter a full number with the number keys and then press the
START/MEMORY key to begin dialling. You can use this method to dial a
full number when you don't need to speak to the other party before faxing.
Note: Direct Keypad Dialling cannot be used to dial a number within the
same PBX as your fax machine. To send a document to a fax machine in
your PBX, use Normal Dialling.
1
Load the document(s).
The display will show:
SENDEBEREIT
Set the resolution and/or contrast if
desired.
2
Enter the number of the receiving
machine by pressing the numeric keys.
If a pause is required between any of
the digits to access a special service or
an outside line, press the REDIAL key.
The pause will appear as a hyphen.
Several pauses can be entered in a row.
3
Check the display. If the number of the
receiving machine shown is correct, press
the START/MEMORY key.
If it is not correct, press the STOP key
to backspace and clear one digit at a
time, and then re-enter the correct
digit(s).
60
RESOLUTION
ABC DEF
2 3
1
JKL
GHI MNO
4 5 6
PQRS TUV
WXYZ
7 8 9
START/MEMORY