Special Functions; Blocking Reception Of Unwanted Faxes - Sharp UX-51 Operation Manual

7
Special
Functions

Blocking Reception of Unwanted Faxes

The Anti Junk Fax function allows you to block reception of faxes from
parties which you specify. This saves paper by not printing out unwanted
"junk" faxes.
To use this function, first turn it on by setting Option Setting 12 (Junk Fax #
Check) to YES as described in Chapter 8, and then enter the fax numbers
from which you do not want to receive faxes as shown below.
Comments:
Up to 5 numbers can be entered in the Anti Junk Number List.
To clear a number from the Anti Junk Number List, you need to know the
1-digit number which identifies it. If you have forgotten this number, print
out the Anti Junk Number List as described in Chapter 9.
1
Press the keys shown at right.
JUNK FAX # MODE will appear in the
display.
2
Press 1 to store a number in the Anti Junk
Number List, or 2 to clear a number from
the list.
3
Storing: Enter a 1-digit number from 1 to
5. This number identifies the fax number
you will store in the next step.
Clearing: Enter the number which
identifies the fax number you want to
clear, and go to Step 5.
FUNCTION
3
1 or
2
1
(Example)
71