Sharp UX-51 Operation Manual page 28

3
Press the START/MEMORY key.
4
Press a numeric key to select the outgoing
message you want to record:
0: General outgoing message
1: Box 1 outgoing message
2: Box 2 outgoing message
3: Box 3 outgoing message
4: Transfer outgoing message
(This is used for the Transfer
function, which is described in Transfer
Function in this Chapter.)
5
Pick up the handset, press the
START/MEMORY key, and speak into
the handset.
The general outgoing message can be
up to 60 seconds long. A personal
outgoing message can be up to 30
seconds long.
While recording, the display will show
the time remaining to record.
6
When finished, replace the handset or
press the STOP key.
If your message exceeds the time limit
or more than 6 seconds of silence is
detected, recording will stop
automatically.
Recording an Outgoing Message
START/MEMORY
0
1
2
3
4
STOP
or
START/MEMORY
23