Program Dialing - Konica Minolta bizhub 181 User Manual

Faxing
3
Press the one-touch dial
key ([01] through [32])
programmed with the
group of fax numbers
where the fax is to be
sent.
– If a one-touch dial
key was incorrectly
pressed, press the
[Clear/Stop] key to
clear the specified
destination.
– When the switching
plate is closed in the lower position, the keys are numbered 01
through 16.
– When the switching plate is open in the upper position, the keys are
numbered 17 through 32.
4
Press the [Start] key.
Scanning and transmission begin.
To stop the transmission, press the [Clear/Stop] key, and then select
"YES" in the screen that appeared.

Program dialing

If one-touch dial keys have already been programmed with fax numbers and
a transmission/reception function (such as timer transmission or polling re-
ception), that function can be performed simply by pressing the correspond-
ing one-touch dial key.
Note
For details on registering a program, refer to "Registering a dialing pro-
gram" on page 5-35.
Fax kit FK-506
2
2-17