Konica Minolta bizhub 181 User Manual page 178

Utility mode/Fax mode parameters
– For details on F-codes (SUB address and password), refer to "Us-
ing F-codes" on page 3-2.
– If an e-mail address is entered for the destination and the [,] key is
pressed, the BASIC/ADVANCED settings can be specified. For de-
tails on the BASIC/ADVANCED settings, refer to "Selecting BASIC/
ADVANCED settings" on page 4-7.
6
Press the [+] or [,] key until the parameter to be set is selected, and
then press the [OK] key.
– If "SUB, SID SETTING" was selected: Type in the SUB address and
password. A maximum of 20 digits can be entered for the SUB ad-
dress and password.
– If "MODEM SPEED" was selected: Press the [+] or [,] key until
"33.6Kbps", "14.4Kbps" or "9.6Kbps" is selected.
Fax kit FK-506
5
5-21