Displaying The "Fax Rx Operation" Menu - Konica Minolta bizhub 181 User Manual

5
No. FAX RX OPERATION
7 FOOTER
8 SELECT TRAY
9 CLOSED NETWORK
Note
The settings for all parameters on the "FAX RX OPERATION" menu can
also be specified from LSD (Local Setup for Diagnostic). For details, refer
to "Local Setup for Diagnostic (LSD)" on page 7-3.
When optional network interface card NC-503 or image controller IC-206
is installed on the machine, settings can also be specified from the net-
work tool PageScope Web Connection. For details, refer to the User's
Guide for the corresponding option.

Displaying the "FAX RX OPERATION" menu

1
Press the [Utility] key.
The "UTILITY MODE"
menu appears.
5-66
Utility mode/Fax mode parameters
Description
This parameter can be used to select whether or not the re-
ception information (date received, number of pages, etc.) is
printed at the bottom of each received document.
• The manufacturer's default setting is "OFF".
This parameter can be used to select which paper drawer can
be used to supply paper when printing received documents or
communication reports. (A paper drawer that cannot be used
for supplying paper can be specified.)
• The manufacturer's default setting is "ENABLE".
This parameter can be used to select whether or not a fax is
received if the sender's fax number does not match the fax
number programmed with this machine's one-touch dial keys
or speed dial numbers.
• The manufacturer's default setting is "OFF".
Fax kit FK-506