Manual Redialing - Konica Minolta bizhub 181 User Manual

Faxing
6
Select "RETURN", and then press the [OK] key.
7
If necessary, select the Quality setting.
– For details on selecting the Quality setting, refer to "Selecting the
fax quality" on page 2-10.
8
Press the [Start] key.
Scanning and transmission begin.
!
Detail
Since the result report is printed after the transmission is finished, you
can check whether the fax was sent to all destinations.
To stop the transmission, press the [Clear/Stop] key, and then select
"YES" in the screen that appeared. Performing this operation cancels all
selected destinations.
To cancel a timer transmission, press the [Function] key, and then select
"CANCEL RESERV.". For details, refer to "Canceling (deleting) a queued
transmission" on page 2-31.

Manual redialing

Dialing the last destination where a fax was sent is called "redialing".
1
Position the document to be faxed.
– Refer to "Positioning the document" on page 2-6.
2
If necessary, select the Quality setting.
– For details on selecting the Quality setting, refer to "Selecting the
fax quality" on page 2-10.
Fax kit FK-506
2
2-25