Konica Minolta bizhub 181 User Manual page 168

Utility mode/Fax mode parameters
No. ADMIN. MANAGEMENT
5 NETWORK SETTING
6 E-MAIL SETTING 1
7 E-MAIL SETTING 2
8 COMM. SETTING
9 USER SETTING
Note
For details on specifying settings for the parameters on the "USER SET-
TING" menu, refer to "Selecting and checking initial settings" on
page 1-18.
The settings for all parameters available from the "ADMIN. MANAGE-
MENT" menu except for the menu parameters in item 6 can also be spec-
ified from LSD (Local Setup for Diagnostic). For details, refer to "Local
Setup for Diagnostic (LSD)" on page 7-3.
Fax kit FK-506
Description
This menu appears only when optional image controller IC-
206 or network interface card NC-503 is installed.
Settings necessary for connecting to a network can be
specified from this menu.
For details, refer to the User's Guide for the corresponding
option.
This menu appears only when optional image controller IC-
206 or network interface card NC-503 is installed.
Settings for sending Internet faxes and for useful functions
such as adding subjects can be specified from this menu.
For details, refer to the User's Guide for the corresponding
option.
This menu appears only when optional image controller IC-
206 or network interface card NC-503 is installed.
Settings for receiving Internet faxes and for useful functions
such as specifying a forwarding address can be specified
from this menu.
For details, refer to the User's Guide for the corresponding
option.
The parameters on this menu can be used to change the
communication settings for this machine according to the
communication environment.
The parameters on this menu can be used to specify the var-
ious settings that must be specified before the fax functions
can be used.
5
5-11