Utility mode/Fax mode parameters
–
If "SUB, SID SETTING" was selected: Type in the SUB address and
password, and then press the [OK] key. A maximum of 20 digits can
be entered for the SUB address and password.
–
If "MODEM SPEED" was selected: Press the [+] or [,] key until
"33.6Kbps", "14.4Kbps" or "9.6Kbps" is selected, and then press
the [OK] key.
–
Repeat this step until all necessary settings have been specified.
7
Press the [Back] key.
The screen for entering the fax number appears again.
8
Press the [OK] key.
The settings are registered, and the "DIAL REGISTRATION" menu ap-
pears again.
Fax kit FK-506
5
5-27