Utility mode/Fax mode parameters
Specifying the forwarding settings ("FORWARD" parameter)
1
Display the "FAX RX OPERATION" menu.
–
Refer to "Displaying the "FAX RX OPERATION" menu" on
page 5-66.
2
Press the [+] or [,] key until "FORWARD" is selected, and then press
the [OK] key.
3
Press the [+] or [,] key until "OFF", "ON" or "ON (PRINT)" is selected,
and then press the [OK] key.
–
If "ON" or "ON (PRINT)" was selected, continue with step 4.
–
If "OFF" was selected, the "FAX RX OPERATION" menu appears
again.
Fax kit FK-506
5
5-75