5
Selecting header printing ("HEADER" parameter)
1
Display the "FAX TX OPERATION" menu.
–
Refer to "Displaying the "FAX TX OPERATION" menu" on
page 5-60.
2
Press the [+] or [,] key until "HEADER" is selected, and then press the
[OK] key.
3
Press the [+] or [,] key until "OFF" or "ON" is selected, and then press
the [OK] key.
The "FAX TX OPERATION" menu appears again.
5-64
Utility mode/Fax mode parameters
Fax kit FK-506