5
3
Press the one-touch dial key to be programmed.
4
Use the keypad to type in the name of the recipient, and then press the
[OK] key.
–
For details on entering text, refer to "Entering text" on page 1-12.
–
A maximum of 20 characters can be entered for the name of the re-
cipient.
5
Using the keypad, type in the fax number of the recipient.
–
A maximum of 30 digits can be entered for the fax number.
–
For details on entering text, refer to "Entering text" on page 1-12.
–
If settings are not to be specified for F-code transmission, the com-
munication speed or the transmission time, press the [OK] key. The
settings are registered, continue with step 8.
–
To specify settings for F-code transmission, the communication
speed or the transmission time, press the [,], and then continue
with the next step.
5-20
Utility mode/Fax mode parameters
Fax kit FK-506