Konica Minolta bizhub 181 User Manual page 137

4
6
Press the [Start] key.
– If the document is loaded into the document feeder, the machine
starts scanning the document and sending the fax.
– To stop the transmission, press the [Clear/Stop] key, and then se-
lect "YES" in the screen that appeared.
– If the document is placed on the original glass, continue with step 7.
– With Internet fax communication, the following functions can be
used in the same way as with fax communications using a tele-
phone line.
Broadcast transmission (page 2-22)
Timer transmission (page 2-43)
Queued transmission (page 2-41)
Forwarding (page 3-25)
Relay broadcast transmissions (page 3-23)
– If the fax could not be sent, a transmission report is printed. For de-
tails, refer to "Checking communication results (reports/lists)" on
page 2-35.
When the transmission is finished, a beep is sounded.
7
Press the [+] or [,] key until "AUTO DETECTION" or "MANUAL" is se-
lected, and then press the [OK] key.
8
To begin scanning, press the [OK] key.
– To change the size of paper to be scanned, press the [,] key, and
then specify the size.
4-4
Internet faxing
Fax kit FK-506