5
4
Use a one-touch dial key, a speed dial number or the keypad to specify
the fax number of the forwarding destination, and then press the [OK]
key.
The "FAX RX OPERATION" menu appears again.
Note
When optional image controller IC-206 or network interface card NC-503
is installed on the machine, an e-mail address can be specified as the for-
warding destination. For details, refer to the User's Guide for the corre-
sponding option.
If an e-mail address is entered for the destination and the [,] key is
pressed, the BASIC/ADVANCED settings can be specified. For details on
the BASIC/ADVANCED settings, refer to "Selecting BASIC/ADVANCED
settings" on page 4-7.
Selecting footer printing ("FOOTER" parameter)
1
Display the "FAX RX OPERATION" menu.
–
Refer to "Displaying the "FAX RX OPERATION" menu" on
page 5-66.
5-76
Utility mode/Fax mode parameters
Fax kit FK-506