Konica Minolta bizhub 181 User Manual page 31

1
No. Part name
22 [Fax] key/indicator
23 [Scan] key/indicator
24 [Copy] key/indicator
25 [123/ABC] key
26 [Reset] key
27 [Interrupt] key/indicator
1-6
22 23 24
30
Description
Press to enter Fax mode. The indicator on the key
lights up in green to indicate that the machine is in Fax
mode.
Press to enter Scan mode. The indicator on the key
lights up in green to indicate that the machine is in
Scan mode. (Available only when network interface
card NC-503 or image controller IC-206 are installed)
Press to enter Copy mode. The indicator on the key
lights up in green to indicate that the machine is in
Copy mode.
Press to switch between number input mode and letter
input mode.
• Press to clear all settings (except programmed set-
tings) entered from the control panel.
• The currently specified job is canceled. (Pressing
this key does not switch the machine to Copy or Fax
mode.)
Press to enter Interrupt mode. The indicator on the key
lights up in green to indicate that the machine is in In-
terrupt mode.
Press the key again to cancel Interrupt mode and re-
turn to the mode before Interrupt mode was entered.
If this key is pressed while a received fax or computer
document is being printed, printing stops so that the
interrupting copy job can be performed. Press this key
again to continue printing the received fax or computer
document.
25 26
29
Precaution
27
28
Fax kit FK-506