Selecting The Default Transmission Mode ("Default Tx" Parameter) - Konica Minolta bizhub 181 User Manual

Utility mode/Fax mode parameters

Selecting the default transmission mode ("DEFAULT TX" parameter)

1
Display the "FAX TX OPERATION" menu.
– Refer to "Displaying the "FAX TX OPERATION" menu" on
page 5-60.
2
Press the [+] or [,] key until "DEFAULT TX" is selected, and then press
the [OK] key.
3
Press the [+] or [,] key until "MEMORY TX" or "ADF TX" is selected,
and then press the [OK] key.
The "FAX TX OPERATION" menu appears again.
Fax kit FK-506
5
5-63